ROGE Support
Setup, programming, and maintenance for the set-in-place ROGE line — ROGE Mini, ROGE One, and ROGE 3. Set it once and walk away. Quick reference below; always follow your unit's owner's manual.
Set It in Place, Program, Walk Away
- Place ROGE in its fixed room. ROGE is set-in-place — it lives in the space it treats.
- Mix HOCl solution to 294 PPM (see the Mixing & Maintenance guide) and fill the reservoir.
- Program the intermittent fog cycles for the room. ROGE runs on a clock with automatic shut-off — no operator standing by.
- Leave it to run its cycle. Refill and restart it as your routine requires.
Three Set-in-Place Models
ROGE comes in three sizes for fixed rooms: ROGE Mini for small rooms, ROGE One for mid-size rooms (exam rooms, single offices, kennels), and ROGE 3 for larger fixed rooms. All run intermittent fog cycles with variable output and auto shut-off — you start the unit and it shuts off on its own when the cycle ends.
Keep ROGE Running Like New
Descale every 6 months
Mix one descaler packet with one gallon of water, run it through the unit, let it sit 30–45 minutes, then flush with clean water. Descale more often in hard-water areas. Refer to the product label for the EPA-approved shelf life of mixed solution.
ROGE Fogging Times
ROGE Mini
| Room type | Estimated run time |
|---|---|
| Office / hotel / hospital room | 15 min |
| Classroom | 45 min |
| Gym / locker room | n/a |
| Auditorium | n/a |
Baselines measured in optimal conditions. Airflow and pressure are the determining factor in every application — validate against your space and build SOPs from there. Full coverage figures are in the owner's manual.
ROGE One
| Room type | Estimated run time |
|---|---|
| Office / hotel / hospital room | 10 min |
| Classroom | 30 min |
| Gym / locker room | 60 min |
| Auditorium | 75 min |
Baselines measured in optimal conditions. Airflow and pressure are the determining factor in every application — validate against your space and build SOPs from there. Full coverage figures are in the owner's manual.
ROGE 3
| Room type | Estimated run time |
|---|---|
| Office / hotel / hospital room | 6 min |
| Classroom | 20 min |
| Gym / locker room | 45 min |
| Auditorium | 60 min |
Baselines measured in optimal conditions. Airflow and pressure are the determining factor in every application — validate against your space and build SOPs from there. Full coverage figures are in the owner's manual.
ROGE FAQ
Confirm the reservoir has solution, the unit is powered, and the cycle was started. Then descale if output is weak. For specific indicator lights or error codes, see the owner's manual or call 855-687-4342.
No. ROGE is set-in-place — it stays in one fixed room; you start it and it runs its intermittent fog cycle, then shuts off. AYRUS is the portable line you carry between rooms; LUVIAN is the big mobile unit for large facilities.
ROGE Mini is for small rooms, ROGE One for mid-size fixed rooms, and ROGE 3 for larger fixed rooms — matched to room volume. All run intermittent fog cycles with variable output and auto shut-off.
No. Coin replacement is specific to AYRUS. ROGE's routine maintenance is descaling every 6 months.
Watch: Operating Your ROGE
How to Operate the ROGE One
Running the ROGE One set-in-place unit, step by step.
How to Run the ROGE 3
Running the ROGE 3 set-in-place unit, step by step.
Need the Full Manual or a Hand?
Model-specific owner's manuals cover full setup, indicator lights, and error codes. Distributors can pull complete documentation from the portal, or call support Monday–Friday.