LUVIAN Support
Setup, operation, and maintenance for the big mobile LUVIAN line — high-output units that roll through large facilities. Quick reference below; always follow your unit's owner's manual.
Setup & Deployment
- Roll LUVIAN into position — it's built to move through a facility and treat large volumes from a central point in each space.
- Mix HOCl solution to 294 PPM (see the Mixing & Maintenance guide) and fill the tank. LUVIAN's larger capacity is built for big rooms and full routes.
- Set the run time and start. LUVIAN runs a timed cycle and shuts off automatically. (An optional programmable timer adds self-starting, scheduled cycles.)
- Let the unit treat the volume of the room, then move to the next space.
Big, Mobile, Timed
LUVIAN is the high-output family: LUVIAN 6 and LUVIAN 10 for large rooms and suites, with a higher-capacity LUVIAN 18 for the largest facilities. All roll through the facility, put out high fog volume, carry a large solution capacity, and run timed cycles with auto shut-off. An optional programmable timer adds self-starting, scheduled cycles.
Detailed installation, tank capacity, and coverage figures are in each model's owner's manual.
Keep LUVIAN Running Like New
Descale every 6 months
Mix one descaler packet with one gallon of water, run it through the unit, let it sit 30–45 minutes, then flush with clean water. Descale more often in hard-water areas. Refer to the product label for the EPA-approved shelf life of mixed solution.
LUVIAN Fogging Times
LUVIAN 6
| Room type | Estimated run time |
|---|---|
| Office / hotel / hospital room | 2 min |
| Classroom | 7 min |
| Gym / locker room | 20 min |
| Auditorium | 20 min |
Baselines measured in optimal conditions. Airflow and pressure are the determining factor in every application — validate against your space and build SOPs from there. Full coverage figures are in the owner's manual.
LUVIAN 10
| Room type | Estimated run time |
|---|---|
| Office / hotel / hospital room | 1 min |
| Classroom | 5 min |
| Gym / locker room | 10 min |
| Auditorium | 10 min |
Baselines measured in optimal conditions. Airflow and pressure are the determining factor in every application — validate against your space and build SOPs from there. Full coverage figures are in the owner's manual.
LUVIAN 18 delivers the highest output in the family for the largest spaces — run times per its owner's manual.
LUVIAN FAQ
Confirm tank level and correct mixing, then descale — mineral buildup is the most common cause of reduced output. For specific indicator lights or error codes, see the owner's manual or call 855-687-4342.
LUVIAN 6 suits large single rooms; LUVIAN 10 handles bigger volumes and suites; LUVIAN 18 is for the largest facilities. Tell us square footage and ceiling height and we'll spec the unit.
No. Coin replacement is specific to AYRUS. LUVIAN uses different atomization; its main routine maintenance is descaling every 6 months.
HOCl at GEIA working concentration is near-neutral and residue-free. Follow your facility SOP and the tablet label for occupied-space use in your application.
Watch: LUVIAN How-To
LUVIAN Series — Startup Process
Starting up the LUVIAN series for a treatment cycle.
Setting the Countdown Timer
The countdown timer is standard on LUVIAN — how to change the run-time duration.
Need the Full Manual or a Hand?
Model-specific owner's manuals cover full setup, indicator lights, and error codes. Distributors can pull complete documentation from the portal, or call support Monday–Friday.